详解基于Linux的LVM无缝磁盘水平扩容
环境
名称 |
属性 |
---|---|
CPU |
x5650 |
内存 |
4G |
磁盘 |
20G+4TB |
这时候,我们假设服务器已经有如下东西:
- 安装好了Parted(yum install parted)
- 分区容量已经告捷,公司为服务器增加了一块4T硬盘用来增加容量!
- 除了/boot分区外,其余都为LVM 模式的扩展逻辑分区
软件安装与信息查看
首先查看软件是否安装:
[root@Candy ~]# rpm -qa | grep lvm
lvm2-libs-2.02.118-2.el6.x86_64
lvm2-2.02.118-2.el6.x86_64
[root@Candy ~]# lv
lvchange lvextend lvmdiskscan lvmsar lvresize
lvconvert lvm lvmdump lvreduce lvs
lvcreate lvmchange lvmetad lvremove lvscan
lvdisplay lvmconf lvmsadc lvrename
[root@Candy ~]# rpm -qa | grep parted
parted-2.1-29.el6.x86_64
软件准备好后顺便查看下 VM 硬件:
[root@Candy ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_candy-root
7.3G 231M 6.7G 4% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 477M 30M 422M 7% /boot
/dev/mapper/vg_candy-home
3.9G 8.0M 3.7G 1% /home
/dev/mapper/vg_candy-usr
3.9G 382M 3.3G 11% /usr
/dev/mapper/vg_candy-var
3.9G 63M 3.6G 2% /var
[root@Candy ~]# fdisk -l
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006e71c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 2611 20458496 8e Linux LVM
Disk /dev/sdb: 4398.0 GB, 4398046511104 bytes
255 heads, 63 sectors/track, 534698 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_candy-root: 8061 MB, 8061452288 bytes
255 heads, 63 sectors/track, 980 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_candy-usr: 4294 MB, 4294967296 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_candy-var: 4294 MB, 4294967296 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_candy-home: 4294 MB, 4294967296 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[root@Candy ~]# ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sdb
这时候我们看到,Centos 已经知道有个sdb的盘了,但是没挂载与分区。
使用Parted进行扩容前的分区
现在假设除了/boot 其余分区都满了! 我们需要先进行分区,将4T的硬盘用上(/dev/sdb).
[root@Candy ~]# parted /dev/sdb
GNU Parted 2.1
使用 /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) mklabel
新的磁盘标签类型? gpt
(parted) mkpart
分区名称? []?
文件系统类型? [ext2]? ext4
起始点? 0T
结束点? 4T
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 4398GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name 标志
1 1049kB 4398GB 4398GB
(parted)set 1 lvm on
(parted)p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 4398GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name 标志
1 1049kB 4398GB 4398GB lvm
(parted)q
[root@Candy ~]# ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sdb /dev/sdb1
现在让我们来解释一下操作:
- mklabel将磁盘转换为gpt分区,因为MBR分区无法支持TB级硬盘(具体请自行查阅,parted当然也支持TB级以下的操作)
- mkpart将转换好的gpt磁盘进行分区,需要提供文件系统类型、开始点、结束点。
- 输入p 打印出刚才才做后生成的分区。
- set 1 lvm on 是将num为1的分区,tager设置为LVM ,这样才能添加到vm卷组里
下一步,我们查看我们的LVM组名叫什么:
[root@Candy ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg_candy 1 4 0 wz--n- 19.51g 0
[root@Candy ~]# vgdisplay
--- Volume group ---
VG Name vg_candy
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 5
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 4
Open LV 4
Max PV 0
Cur PV 1
Act PV 1
VG Size 19.51 GiB
PE Size 4.00 MiB
Total PE 4994
Alloc PE / Size 4994 / 19.51 GiB
Free PE / Size 0 / 0
VG UUID Gcm5Ml-fc88-Xk5q-xuPC-Kj7Y-alfK-i770Gc
[root@Candy ~]# lvscan
ACTIVE '/dev/vg_candy/usr' [4.00 GiB] inherit
ACTIVE '/dev/vg_candy/var' [4.00 GiB] inherit
ACTIVE '/dev/vg_candy/home' [4.00 GiB] inherit
ACTIVE '/dev/vg_candy/root' [7.51 GiB] inherit
[root@Candy ~]#
知道lvm卷组叫 ‘vg_candy’了, 我们就使用vgextend来向lvm ‘vg_candy’ 卷组添加成员了.
[root@Candy ~]# vgextend vag_candy /dev/sdb1
Physical volume "/dev/sdb1" successfully created
Volume group "vg_candy" successfully extended
现在我们再用vgs命令看一下pv个数:
[root@Candy ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg_candy 2 4 0 wz--n- 4.02t 4.00t
大家对比未添加时的vgs是否有看到PV个数从1变为2了!
现在让我们用vgdisplay看看现在分区的容量.
[root@Candy ~]# vgdisplay
--- Volume group ---
VG Name vg_candy
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 6
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 4
Open LV 4
Max PV 0
Cur PV 2
Act PV 2
VG Size 4.02 TiB
PE Size 4.00 MiB
Total PE 1053569
Alloc PE / Size 4994 / 19.51 GiB
Free PE / Size 1048575 / 4.00 TiB
VG UUID Gcm5Ml-fc88-Xk5q-xuPC-Kj7Y-alfK-i770Gc
再次对比未添加的vgdiplay命令发现,FreePE 的value 从 0 / 0 变为 1048575 / 4.00 TiB . 这样说明Candy已经成功将4TB的lvm 分区添加进入到vg_candy 逻辑卷组里了。
现在我们对所有逻辑分区进行扩容前,df -h 看看有哪些分区。
[root@Candy ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_candy-root 7.3G 231M 6.7G 4% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 477M 30M 422M 7% /boot
/dev/mapper/vg_candy-home 3.9G 8.0M 3.7G 1% /home
/dev/mapper/vg_candy-usr 3.9G 382M 3.3G 11% /usr
/dev/mapper/vg_candy-var 3.9G 63M 3.6G 2% /var
现在麻烦的事已经做完了,接下来就剩下为分区进行扩容了.
为磁盘进行扩容
假设:我们需要向 这些分区都添加500G容量: /
、 /home
、 /usr
、 /var
[root@Candy ~]# lvextend -L +500G /dev/mapper/vg_candy-root
Size of logical volume vg_candy/root changed from 7.51 GiB (1922 extents) to 507.51 GiB (129922 extents).
Logical volume root successfully resized
[root@Candy ~]# lvextend -L +500G /dev/mapper/vg_candy-home
Size of logical volume vg_candy/home changed from 4.00 GiB (1024 extents) to 504.00 GiB (129024 extents).
Logical volume home successfully resized
[root@Candy ~]# lvextend -L +500G /dev/mapper/vg_candy-usr
Size of logical volume vg_candy/usr changed from 4.00 GiB (1024 extents) to 504.00 GiB (129024 extents).
Logical volume usr successfully resized
[root@Candy ~]# lvextend -L +500G /dev/mapper/vg_candy-var
Size of logical volume vg_candy/var changed from 4.00 GiB (1024 extents) to 504.00 GiB (129024 extents).
Logical volume var successfully resized
大家注意,这一步操作时不可逆的! 如果输入了错误的分区名字还好! 如果添加到其它分区了,就得重复N遍来缩容,比较麻烦哦! 建议大家注仔细核对上面的FileSystem. 切记切记….
提示扩容成功! 让我们再次用上述命令查看LVM信息:
[root@Candy ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg_candy 2 4 0 wz--n- 4.02t 2.05t
[root@Candy ~]# lvscan
ACTIVE '/dev/vg_candy/usr' [504.00 GiB] inherit
ACTIVE '/dev/vg_candy/var' [504.00 GiB] inherit
ACTIVE '/dev/vg_candy/home' [504.00 GiB] inherit
ACTIVE '/dev/vg_candy/root' [507.51 GiB] inherit
[root@Candy ~]# vgdisplay
--- Volume group ---
VG Name vg_candy
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 10
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 4
Open LV 4
Max PV 0
Cur PV 2
Act PV 2
VG Size 4.02 TiB
PE Size 4.00 MiB
Total PE 1053569
Alloc PE / Size 516994 / 1.97 TiB
Free PE / Size 536575 / 2.05 TiB
VG UUID Gcm5Ml-fc88-Xk5q-xuPC-Kj7Y-alfK-i770Gc
[root@Candy ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_candy-root 7.3G 231M 6.7G 4% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 477M 30M 422M 7% /boot
/dev/mapper/vg_candy-home 3.9G 8.0M 3.7G 1% /home
/dev/mapper/vg_candy-usr 3.9G 382M 3.3G 11% /usr
/dev/mapper/vg_candy-var 3.9G 63M 3.6G 2% /var
看到这里大家可能奇怪! 为什么df -h 还没变呢?
刷新磁盘信息与写入
我们需要用resize2fs 重设分区大小, 这样才能使df -h 也能生效.
而resize2fs 需要的时间与你给予的容量线性叠加. 也就是说你给的容量越多,resize2fs 的需要的时间就越多。
[root@Candy ~]# resize2fs /dev//mapper/vg_candy-root
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev//mapper/vg_candy-root is mounted on /; on-line resizing required old desc_blocks = 1, new_desc_blocks = 32
Performing an on-line resize of /dev//mapper/vg_candy-root to 133040128 (4k) blocks.
The filesystem on /dev//mapper/vg_candy-root is now 133040128 blocks long.
[root@Candy ~]# resize2fs /dev//mapper/vg_candy-usr
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev//mapper/vg_candy-usr is mounted on /usr; on-line resizing required old desc_blocks = 1, new_desc_blocks = 32
Performing an on-line resize of /dev//mapper/vg_candy-usr to 132120576 (4k) blocks.
The filesystem on /dev//mapper/vg_candy-usr is now 132120576 blocks long.
[root@Candy ~]# resize2fs /dev//mapper/vg_candy-var
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev//mapper/vg_candy-var is mounted on /var; on-line resizing required old desc_blocks = 1, new_desc_blocks = 32
Performing an on-line resize of /dev//mapper/vg_candy-var to 132120576 (4k) blocks.
The filesystem on /dev//mapper/vg_candy-var is now 132120576 blocks long.
[root@Candy ~]# resize2fs /dev//mapper/vg_candy-home
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev//mapper/vg_candy-home is mounted on /home; on-line resizing required old desc_blocks = 1, new_desc_blocks = 32
Performing an on-line resize of /dev//mapper/vg_candy-home to 132120576 (4k) blocks.
The filesystem on /dev//mapper/vg_candy-home is now 132120576 blocks long.
[root@Candy ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_candy-root 500G 245M 474G 1% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
/dev/sda1 477M 30M 422M 7% /boot
/dev/mapper/vg_candy-home 496G 16M 471G 1% /home
/dev/mapper/vg_candy-usr 496G 390M 471G 1% /usr
/dev/mapper/vg_candy-var 496G 71M 471G 1% /var
结束语
顺便给大家晒一张重启后系统自动挂载的图!
Linux系统还是比较聪明的. 其实重启与不重启都能使用, 只是为大家演示重启后的效果.
以上就是本文的全部内容,希望对大家的学习有所帮助。
- ECMAScript 6入门 - 变量的解构赋值
- 二叉排序树 python实现
- ES6新特性概览
- 数据结构-顺序表的定义及python实现
- 洛谷P1516 青蛙的约会
- python实现二叉树的创建和遍历
- python中numpy模块下的np.clip()的用法
- Leetcode-Easy 543. Diameter of Binary Tree
- Leetcode-Easy 572. Subtree of Another Tree
- 图解javascript this指向什么?
- 2017/6/8-python正则表达式的使用
- 洛谷P1306 斐波那契公约数
- Angular开发实践(二):HRM运行机制
- Angular开发实践(一):环境准备及框架搭建
- JavaScript 教程
- JavaScript 编辑工具
- JavaScript 与HTML
- JavaScript 与Java
- JavaScript 数据结构
- JavaScript 基本数据类型
- JavaScript 特殊数据类型
- JavaScript 运算符
- JavaScript typeof 运算符
- JavaScript 表达式
- JavaScript 类型转换
- JavaScript 基本语法
- JavaScript 注释
- Javascript 基本处理流程
- Javascript 选择结构
- Javascript if 语句
- Javascript if 语句的嵌套
- Javascript switch 语句
- Javascript 循环结构
- Javascript 循环结构实例
- Javascript 跳转语句
- Javascript 控制语句总结
- Javascript 函数介绍
- Javascript 函数的定义
- Javascript 函数调用
- Javascript 几种特殊的函数
- JavaScript 内置函数简介
- Javascript eval() 函数
- Javascript isFinite() 函数
- Javascript isNaN() 函数
- parseInt() 与 parseFloat()
- escape() 与 unescape()
- Javascript 字符串介绍
- Javascript length属性
- javascript 字符串函数
- Javascript 日期对象简介
- Javascript 日期对象用途
- Date 对象属性和方法
- Javascript 数组是什么
- Javascript 创建数组
- Javascript 数组赋值与取值
- Javascript 数组属性和方法