kubernetes(k8s)集群安装calico
时间:2022-07-23
本文章向大家介绍kubernetes(k8s)集群安装calico，主要内容包括其使用实例、应用技巧、基本知识点总结和需要注意事项，具有一定的参考价值，需要的朋友可以参考一下。
添加hosts解析
cat /etc/hosts
10.39.7.51 k8s-master-51
10.39.7.57 k8s-master-57
10.39.7.52 k8s-master-52下载calico
wget http://docs.projectcalico.org/v3.2/getting-started/kubernetes/installation/hosted/calico.yaml下载所需镜像
# 建议下载后 推到自己的镜像仓库
[root@k8s-master-51 ~]# cat calico.yaml |grep image
image: quay.io/calico/node:v3.2.4
image: quay.io/calico/cni:v3.2.4
image: quay.io/calico/kube-controllers:v3.2.4配置etcd的ip
etcd_endpoints: "https://10.39.7.51:2379,https://10.39.7.52:2379,https://10.39.7.57:2379"根据注释添加相关值
# If you're using TLS enabled etcd uncomment the following.
# You must also populate the Secret below with these files.
etcd_ca: "/calico-secrets/etcd-ca" # "/calico-secrets/etcd-ca"
etcd_cert: "/calico-secrets/etcd-cert" # "/calico-secrets/etcd-cert"
etcd_key: "/calico-secrets/etcd-key # "/calico-secrets/etcd-key"因使用青云关系 需调整mtu值
veth_mtu: "1340"将etcd 和ca 证书用base64加密添加到calico.yaml 的相关位置
apiVersion: v1
kind: Secret
type: Opaque
metadata:
name: calico-etcd-secrets
namespace: kube-system
data:
etcd-key: (cat /etc/kubernetes/ssl/etcd-key.pem | base64 | tr -d 'n')
etcd-cert: (cat /etc/kubernetes/ssl/etcd.pem | base64 | tr -d 'n')
etcd-ca: (cat /etc/kubernetes/ssl/ca.pem | base64 | tr -d 'n')修改calico.yaml中的CALICO_IPV4POOL_CIDR 下的value值
- name: CALICO_IPV4POOL_CIDR
value: "10.253.0.0/18"安装calico
kubectl apply -f calico.yaml修改kubelet.service 配置网络插件
cat > /etc/systemd/system/kubelet.service <<EOF
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/usr/local/bin/kubelet
--hostname-override=k8s-master-51
--pod-infra-container-image=reg.enncloud.cn/enncloud/pause-amd64:3.1
--pod-manifest-path=/etc/kubernetes/manifests
--bootstrap-kubeconfig=/etc/kubernetes/bootstrap.kubeconfig
--kubeconfig=/etc/kubernetes/kubelet.config
--config=/etc/kubernetes/kubelet.config.json
--cert-dir=/etc/kubernetes/pki
--allow-privileged=true
--kube-reserved cpu=500m,memory=512m
--image-gc-high-threshold=85 --image-gc-low-threshold=70
--logtostderr=true
--network-plugin=cni
--runtime-cgroups=/systemd/system.slice
--kubelet-cgroups=/systemd/system.slice
--v=2
[Install]
WantedBy=multi-user.target
EOF
# 重启kubelet
systemctl daemon-reload
systemctl restart kubelet报错记录
calico 相关的pod无法创建 日志如下
[root@k8s-master-51 ~]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
0dabd1835d53 65733b9f36a6 "/usr/bin/kube-con..." About a minute ago Exited (1) 53 seconds ago k8s_calico-kube-controllers_calico-kube-controllers-5cf99599ff-hsdqw_kube-system_9175cc10-fdd2-11e8-9144-525463f5581b_13
d434d4ed5e47 e537e5882f91 "start_runit" About a minute ago Exited (1) 55 seconds ago
[root@k8s-master-51 ~]# docker logs 0dabd1835d53
#注意：Kubeconfig 字段为空无法连接etcd
2018-12-12 06:39:47.068 [INFO][1] main.go 73: Loaded configuration from environment config=&config.Config{LogLevel:"info", ReconcilerPeriod:"5m", CompactionPeriod:"10m", EnabledControllers:"policy,profile,workloadendpoint,node", WorkloadEndpointWorkers:1, ProfileWorkers:1, PolicyWorkers:1, NodeWorkers:1, Kubeconfig:"", HealthEnabled:true}
2018-12-12 06:39:57.069 [FATAL][1] main.go 85: Failed to start error=failed to build Calico client: context deadline exceeded
[root@k8s-master-51 ~]# docker logs d434d4ed5e47
2018-12-12 06:39:44.948 [INFO][8] startup.go 252: Early log level set to info
2018-12-12 06:39:44.949 [INFO][8] startup.go 272: Using HOSTNAME environment (lowercase) for node name
2018-12-12 06:39:44.949 [INFO][8] startup.go 280: Determined node name: k8s-master-51
Calico node failed to start
ERROR: Error accessing the Calico datastore: context deadline exceeded
# 解决办法：
修改前：
# If you're using TLS enabled etcd uncomment the following.
# You must also populate the Secret below with these files.
etcd_ca: "" # "/calico-secrets/etcd-ca"
etcd_cert: "" # "/calico-secrets/etcd-cert"
etcd_key: "" # "/calico-secrets/etcd-key"
修改后：
etcd_ca: "/calico-secrets/etcd-ca" # "/calico-secrets/etcd-ca"
etcd_cert: "/calico-secrets/etcd-cert" # "/calico-secrets/etcd-cert"
etcd_key: "/calico-secrets/etcd-key" # "/calico-secrets/etcd-key"报错记录
[root@k8s-master-51 manifests]# kubectl get po -nkube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-5cf99599ff-zbmn2 0/1 Running 0 1m
[root@k8s-master-51 manifests]# kubectl logs calico-kube-controllers-5cf99599ff-zbmn2 -nkube-system
E1212 10:18:20.617128 1 reflector.go:205] github.com/projectcalico/kube-controllers/pkg/controllers/networkpolicy/policy_controller.go:147: Failed to list *v1.NetworkPolicy: Get https://10.254.0.1:443/apis/networking.k8s.io/v1/networkpolicies?limit=500&resourceVersion=0: dial tcp 10.254.0.1:443: i/o timeout
E1212 10:18:20.657457 1 reflector.go:205] github.com/projectcalico/kube-controllers/pkg/controllers/pod/pod_controller.go:206: Failed to list *v1.Pod: Get https://10.254.0.1:443/api/v1/pods?limit=500&resourceVersion=0: dial tcp 10.254.0.1:443: i/o timeout
2018-12-12 11:01:12.737 [ERROR][1] main.go 188: Failed to reach apiserver error=<nil>
[root@k8s-master-51 manifests]# kubectl describe po calico-kube-controllers-5cf99599ff-zbmn2 -nkube-system
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 5m default-scheduler Successfully assigned kube-system/calico-kube-controllers-5cf99599ff-zbmn2 to k8s-master-57
Normal Pulling 5m kubelet, k8s-master-57 pulling image "quay.io/calico/kube-controllers:v3.2.4"
Normal Pulled 5m kubelet, k8s-master-57 Successfully pulled image "quay.io/calico/kube-controllers:v3.2.4"
Normal Created 5m kubelet, k8s-master-57 Created container
Normal Started 5m kubelet, k8s-master-57 Started container
Warning Unhealthy 4m (x3 over 4m) kubelet, k8s-master-57 Readiness probe failed: initialized to false
Warning Unhealthy 28s (x25 over 4m) kubelet, k8s-master-57 Readiness probe failed: Error reaching apiserver: <nil> with http status code: 0
#### fuck 我在51上执行的命令 才发现 calico-controller 一直跑在57上
### google 有提到cpu的问题 经查看 果不其然啊。。。。。。。
top - 18:28:42 up 1:29, 1 user, load average: 2.17, 2.15, 1.33
Tasks: 108 total, 1 running, 107 sleeping, 0 stopped, 0 zombie
%Cpu(s): 96.3 us, 3.0 sy, 0.0 ni, 0.5 id, 0.0 wa, 0.0 hi, 0.2 si, 0.0 st
KiB Mem : 1882600 total, 206224 free, 662924 used, 1013452 buff/cache
KiB Swap: 1048572 total, 1048572 free, 0 used. 1025652 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
31230 root 20 0 37076 16788 9372 S 187.7 0.9 20:31.36 kube-controller
#### 可能是没装kube-proxy 这之间的联系 还没有搞清楚
安装完kube-proxy之后 calico-controller 起来了
[root@k8s-master-51 ~]# kubectl get po -nkube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-5cf99599ff-cbs5l 1/1 Running 0 21hcalico.yaml
# Calico Version v3.2.4
# https://docs.projectcalico.org/v3.2/releases#v3.2.4
# This manifest includes the following component versions:
# calico/node:v3.2.4
# calico/cni:v3.2.4
# calico/kube-controllers:v3.2.4
# This ConfigMap is used to configure a self-hosted Calico installation.
kind: ConfigMap
apiVersion: v1
metadata:
name: calico-config
namespace: kube-system
data:
# Configure this with the location of your etcd cluster.
etcd_endpoints: "https://10.39.7.51:2379,https://10.39.7.52:2379,https://10.39.7.57:2379"
# If you're using TLS enabled etcd uncomment the following.
# You must also populate the Secret below with these files.
etcd_ca: "/calico-secrets/etcd-ca" # "/calico-secrets/etcd-ca"
etcd_cert: "/calico-secrets/etcd-cert" # "/calico-secrets/etcd-cert"
etcd_key: "/calico-secrets/etcd-key" # "/calico-secrets/etcd-key"
# Configure the Calico backend to use.
calico_backend: "bird"
# Configure the MTU to use
veth_mtu: "1340"
# The CNI network configuration to install on each node. The special
# values in this config will be automatically populated.
cni_network_config: |-
{
"name": "k8s-pod-network",
"cniVersion": "0.3.0",
"plugins": [
{
"type": "calico",
"log_level": "info",
"etcd_endpoints": "__ETCD_ENDPOINTS__",
"etcd_key_file": "__ETCD_KEY_FILE__",
"etcd_cert_file": "__ETCD_CERT_FILE__",
"etcd_ca_cert_file": "__ETCD_CA_CERT_FILE__",
"mtu": __CNI_MTU__,
"ipam": {
"type": "calico-ipam"
},
"policy": {
"type": "k8s"
},
"kubernetes": {
"kubeconfig": "__KUBECONFIG_FILEPATH__"
}
},
{
"type": "portmap",
"snat": true,
"capabilities": {"portMappings": true}
}
]
}
---
# The following contains k8s Secrets for use with a TLS enabled etcd cluster.
# For information on populating Secrets, see http://kubernetes.io/docs/user-guide/secrets/
apiVersion: v1
kind: Secret
type: Opaque
metadata:
name: calico-etcd-secrets
namespace: kube-system
data:
# Populate the following files with etcd TLS configuration if desired, but leave blank if
# not using TLS for etcd.
# This self-hosted install expects three files with the following names. The values
# should be base64 encoded strings of the entire contents of each file.
etcd-key: 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
etcd-cert: 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
etcd-ca: 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
---
# This manifest installs the calico/node container, as well
# as the Calico CNI plugins and network config on
# each master and worker node in a Kubernetes cluster.
kind: DaemonSet
apiVersion: extensions/v1beta1
metadata:
name: calico-node
namespace: kube-system
labels:
k8s-app: calico-node
spec:
selector:
matchLabels:
k8s-app: calico-node
updateStrategy:
type: RollingUpdate
rollingUpdate:
maxUnavailable: 1
template:
metadata:
labels:
k8s-app: calico-node
annotations:
# This, along with the CriticalAddonsOnly toleration below,
# marks the pod as a critical add-on, ensuring it gets
# priority scheduling and that its resources are reserved
# if it ever gets evicted.
scheduler.alpha.kubernetes.io/critical-pod: ''
spec:
nodeSelector:
beta.kubernetes.io/os: linux
hostNetwork: true
tolerations:
# Make sure calico-node gets scheduled on all nodes.
- effect: NoSchedule
operator: Exists
# Mark the pod as a critical add-on for rescheduling.
- key: CriticalAddonsOnly
operator: Exists
- effect: NoExecute
operator: Exists
serviceAccountName: calico-node
# Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force
# deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods.
terminationGracePeriodSeconds: 0
containers:
# Runs calico/node container on each Kubernetes node. This
# container programs network policy and routes on each
# host.
- name: calico-node
image: quay.io/calico/node:v3.2.4
env:
# The location of the Calico etcd cluster.
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
# Location of the CA certificate for etcd.
- name: ETCD_CA_CERT_FILE
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_ca
# Location of the client key for etcd.
- name: ETCD_KEY_FILE
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_key
# Location of the client certificate for etcd.
- name: ETCD_CERT_FILE
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_cert
# Set noderef for node controller.
- name: CALICO_K8S_NODE_REF
valueFrom:
fieldRef:
fieldPath: spec.nodeName
# Choose the backend to use.
- name: CALICO_NETWORKING_BACKEND
valueFrom:
configMapKeyRef:
name: calico-config
key: calico_backend
# Cluster type to identify the deployment type
- name: CLUSTER_TYPE
value: "k8s,bgp"
# Auto-detect the BGP IP address.
- name: IP
value: "autodetect"
# Enable IPIP
- name: CALICO_IPV4POOL_IPIP
value: "Always"
# Set MTU for tunnel device used if ipip is enabled
- name: FELIX_IPINIPMTU
valueFrom:
configMapKeyRef:
name: calico-config
key: veth_mtu
# The default IPv4 pool to create on startup if none exists. Pod IPs will be
# chosen from this range. Changing this value after installation will have
# no effect. This should fall within `--cluster-cidr`.
- name: CALICO_IPV4POOL_CIDR
value: "10.253.0.0/18"
# Disable file logging so `kubectl logs` works.
- name: CALICO_DISABLE_FILE_LOGGING
value: "true"
# Set Felix endpoint to host default action to ACCEPT.
- name: FELIX_DEFAULTENDPOINTTOHOSTACTION
value: "ACCEPT"
# Disable IPv6 on Kubernetes.
- name: FELIX_IPV6SUPPORT
value: "false"
# Set Felix logging to "info"
- name: FELIX_LOGSEVERITYSCREEN
value: "info"
- name: FELIX_HEALTHENABLED
value: "true"
securityContext:
privileged: true
resources:
requests:
cpu: 250m
livenessProbe:
httpGet:
path: /liveness
port: 9099
host: localhost
periodSeconds: 10
initialDelaySeconds: 10
failureThreshold: 6
readinessProbe:
exec:
command:
- /bin/calico-node
- -bird-ready
- -felix-ready
periodSeconds: 10
volumeMounts:
- mountPath: /lib/modules
name: lib-modules
readOnly: true
- mountPath: /var/run/calico
name: var-run-calico
readOnly: false
- mountPath: /var/lib/calico
name: var-lib-calico
readOnly: false
- mountPath: /calico-secrets
name: etcd-certs
# This container installs the Calico CNI binaries
# and CNI network config file on each node.
- name: install-cni
image: quay.io/calico/cni:v3.2.4
command: ["/install-cni.sh"]
env:
# Name of the CNI config file to create.
- name: CNI_CONF_NAME
value: "10-calico.conflist"
# The location of the Calico etcd cluster.
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
# The CNI network config to install on each node.
- name: CNI_NETWORK_CONFIG
valueFrom:
configMapKeyRef:
name: calico-config
key: cni_network_config
# CNI MTU Config variable
- name: CNI_MTU
valueFrom:
configMapKeyRef:
name: calico-config
key: veth_mtu
volumeMounts:
- mountPath: /host/opt/cni/bin
name: cni-bin-dir
- mountPath: /host/etc/cni/net.d
name: cni-net-dir
- mountPath: /calico-secrets
name: etcd-certs
volumes:
# Used by calico/node.
- name: lib-modules
hostPath:
path: /lib/modules
- name: var-run-calico
hostPath:
path: /var/run/calico
- name: var-lib-calico
hostPath:
path: /var/lib/calico
# Used to install CNI.
- name: cni-bin-dir
hostPath:
path: /opt/cni/bin
- name: cni-net-dir
hostPath:
path: /etc/cni/net.d
# Mount in the etcd TLS secrets with mode 400.
# See https://kubernetes.io/docs/concepts/configuration/secret/
- name: etcd-certs
secret:
secretName: calico-etcd-secrets
defaultMode: 0400
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-node
namespace: kube-system
---
# This manifest deploys the Calico Kubernetes controllers.
# See https://github.com/projectcalico/kube-controllers
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
annotations:
scheduler.alpha.kubernetes.io/critical-pod: ''
spec:
# The controllers can only have a single active instance.
replicas: 1
strategy:
type: Recreate
template:
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
spec:
nodeSelector:
beta.kubernetes.io/os: linux
# The controllers must run in the host network namespace so that
# it isn't governed by policy that would prevent it from working.
hostNetwork: true
tolerations:
# Mark the pod as a critical add-on for rescheduling.
- key: CriticalAddonsOnly
operator: Exists
- key: node-role.kubernetes.io/master
effect: NoSchedule
serviceAccountName: calico-kube-controllers
containers:
- name: calico-kube-controllers
image: quay.io/calico/kube-controllers:v3.2.4
env:
# The location of the Calico etcd cluster.
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
# Location of the CA certificate for etcd.
- name: ETCD_CA_CERT_FILE
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_ca
# Location of the client key for etcd.
- name: ETCD_KEY_FILE
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_key
# Location of the client certificate for etcd.
- name: ETCD_CERT_FILE
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_cert
# Choose which controllers to run.
- name: ENABLED_CONTROLLERS
value: policy,profile,workloadendpoint,node
volumeMounts:
# Mount in the etcd TLS secrets.
- mountPath: /calico-secrets
name: etcd-certs
readinessProbe:
exec:
command:
- /usr/bin/check-status
- -r
volumes:
# Mount in the etcd TLS secrets with mode 400.
# See https://kubernetes.io/docs/concepts/configuration/secret/
- name: etcd-certs
secret:
secretName: calico-etcd-secrets
defaultMode: 0400
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-kube-controllers
namespace: kube-system
- [喵咪开源软件推荐(5)]开源DNS服务-bind
- 详解Python的is操作符
- [喵咪BELK实战(2)] elasticsearch+kibana搭建
- 【第二期】一次学透java.io
- [喵咪BELK实战(1)]浅谈日志的重要性以及介绍BELK
- Unicode编解码函数
- 适配器模式
- [PhalApi实战篇(1)]Redis队列处理异步任务
- 修饰者模式
- PhalApi-RabbitMQ基于PhalApi专业队列拓展
- Python的三个问题
- [喵咪开源软件推荐(4)]Liunx跑分神器-unixbench
- 正则化贪心森林（RGF）的入门简介，含案例研究
- 数据库分库分表中间件 Sharding-JDBC 源码分析 —— SQL 路由（二）之分库分表路由
- JavaScript 教程
- JavaScript 编辑工具
- JavaScript 与HTML
- JavaScript 与Java
- JavaScript 数据结构
- JavaScript 基本数据类型
- JavaScript 特殊数据类型
- JavaScript 运算符
- JavaScript typeof 运算符
- JavaScript 表达式
- JavaScript 类型转换
- JavaScript 基本语法
- JavaScript 注释
- Javascript 基本处理流程
- Javascript 选择结构
- Javascript if 语句
- Javascript if 语句的嵌套
- Javascript switch 语句
- Javascript 循环结构
- Javascript 循环结构实例
- Javascript 跳转语句
- Javascript 控制语句总结
- Javascript 函数介绍
- Javascript 函数的定义
- Javascript 函数调用
- Javascript 几种特殊的函数
- JavaScript 内置函数简介
- Javascript eval() 函数
- Javascript isFinite() 函数
- Javascript isNaN() 函数
- parseInt() 与 parseFloat()
- escape() 与 unescape()
- Javascript 字符串介绍
- Javascript length属性
- javascript 字符串函数
- Javascript 日期对象简介
- Javascript 日期对象用途
- Date 对象属性和方法
- Javascript 数组是什么
- Javascript 创建数组
- Javascript 数组赋值与取值
- Javascript 数组属性和方法
- 解决Pytorch自定义层出现多Variable共享内存错误问题
- PHP观察者模式定义与用法实例分析
- ThinkPHP5.1表单令牌Token失效问题的解决
- PHP设计模式之工厂模式(Factory Pattern)的讲解
- keras K.function获取某层的输出操作
- 浅谈sklearn中predict与predict_proba区别
- 解决Keras中循环使用K.ctc_decode内存不释放的问题
- PDO::getAvailableDrivers讲解
- PDO::_construct讲解
- Yii2.0实现的批量更新及批量插入功能示例
- PDO::inTransaction讲解
- 小程序前后端交互使用JWT
- python文件操作seek()偏移量,读取指正到指定位置操作
- 使用OpenCV去除面积较小的连通域
- 使用vs code编辑调试php配置的方法