Nginx基于TCP/UDP端口的四层负载均衡（stream模块）配置梳理

通过我们会用Nginx的upstream做基于http/https端口的7层负载均衡，由于Nginx老版本不支持tcp协议，所以基于tcp/udp端口的四层负载均衡一般用LVS或Haproxy来做。至于4层负载均衡和7层负载均衡的区别，可以参考:http://www.cnblogs.com/kevingrace/p/6137881.html。然而Nginx从1.9.0版本开始，新增加了一个stream模块，用来实现四层协议的转发、代理或者负载均衡等，鉴于Nginx在7层负载均衡和web service上的成功，和Nginx良好的框架，stream模块前景一片光明。

Nginx的stream模块默认不会自带安装，需要编译安装的时候手动添加上这个模块。废话不多说了，下面介绍下一个自己使用stream做四层负载均衡的案例：

在此之前已经使用Ningx+Keepalived（主从模式）做了7层负载均衡的LB环境，之前编译的时候，没有加上这个stream模块，所以需要后续手动添加该模块。
由于Nginx的LB已经有业务跑在上面，可以选择平滑添加stream模块，并不会对线上业务造成多大影响。步骤如下：

1）现在LB的slave从机上进行平滑添加，然后再将vip切换到从机上，随即在对master主机进行平滑添加该模块。
2）平滑添加即是重新configure编译的时候加上--with-stream，接着make。
3）千万注意，make之后，不要make install，否则会覆盖掉之前的配置！！！

--------------------------------------------------------------------------------------------------
由于本人的LB环境升级了openssl版本，再添加--with-stream重新编译的时候报了错误，具体可参考：
http://www.cnblogs.com/kevingrace/p/8058535.html
--------------------------------------------------------------------------------------------------

检查下，发现nginx没有安装stream模块
[root@external-lb01 ~]# /data/nginx/sbin/nginx -V
nginx version: nginx/1.12.2
built by gcc 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC)
built with OpenSSL 1.1.0g  2 Nov 2017
TLS SNI support enabled
configure arguments: --prefix=/data/nginx --user=www --group=www --with-http_ssl_module --with-http_flv_module 
--with-http_stub_status_module --with-http_gzip_static_module --with-pcre
 
 
操作之前，一定要备份一下之前的nginx安装目录，防止操作失败进行回滚！
[root@external-lb01 ~]# cp -r /data/nginx /mnt/nginx.bak
 
之前的编译命令是：
[root@external-lb01 vhosts]# cd /data/software/nginx-1.12.2
[root@external-lb01 nginx-1.12.2]# ./configure --prefix=/data/nginx --user=www --group=www --with-http_ssl_module 
--with-http_flv_module --with-http_stub_status_module --with-http_gzip_static_module --with-pcre

现在需要手动添加stream，编译命令如下：
[root@external-lb01 vhosts]# cd /data/software/nginx-1.12.2
[root@external-lb01 nginx-1.12.2]# ./configure --prefix=/data/nginx --user=www --group=www --with-http_ssl_module 
--with-http_flv_module --with-http_stub_status_module --with-http_gzip_static_module --with-pcre --with-stream
 
[root@external-lb01 nginx-1.12.2]# make

[root@external-lb01 nginx-1.12.2]# cp -f /data/software/nginx-1.12.2/objs/nginx /data/nginx/sbin/nginx
[root@external-lb01 nginx-1.12.2]# pkill -9 nginx
[root@external-lb01 nginx-1.12.2]# /data/nginx/sbin/nginx

检查下，发现nginx已经安装了stream模块了
[root@external-lb01 nginx-1.12.2]# /data/nginx/sbin/nginx -V
nginx version: nginx/1.12.2
built by gcc 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC)
built with OpenSSL 1.1.0g  2 Nov 2017
TLS SNI support enabled
configure arguments: --prefix=/data/nginx --user=www --group=www --with-http_ssl_module --with-http_flv_module --with-http_stub_status_module --with-http_gzip_static_module --with-pcre --with-stream --with-openssl=/usr/local/ssl

======================================================================================================================
stream的4层负载均衡和upstream的7层负载均衡可以共同配置在nginx中，stream模块用法和http模块差不多，关键的是语法几乎一致。
具体如下：

[root@external-lb01 ~]# cat /data/nginx/conf/nginx.conf
user  www;
worker_processes  8;
 
#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;
 
#pid        logs/nginx.pid;
 
 
events {
    worker_connections  65535;
}
 
stream {
    upstream kk5 {
        server 10.0.58.22:5100;
        server 10.0.58.23:5100;
    }
   upstream kk5http {
      server 10.0.58.22:8000;
      server 10.0.58.23:8000;
   }
   upstream kk5https {
      server 10.0.58.22:8443;
      server 10.0.58.23:8443;
   }
   server {
      listen 5100;
      proxy_connect_timeout 1s;
      proxy_pass kk5;
    }
   server {
      listen 8000;
      proxy_connect_timeout 1s;
      proxy_pass kk5http;
   }
   server {
      listen 8443;
      proxy_connect_timeout 1s;
      proxy_pass kk5https;
   }
}
 
http {
    include       mime.types;
    default_type  application/octet-stream;
    charset utf-8;
       
    ######
    ## set access log format
    ######
    log_format  main  '$remote_addr $remote_user [$time_local] "$request" '
                  '$status $body_bytes_sent "$http_referer" '
                  '$http_user_agent $http_x_forwarded_for $request_time $upstream_response_time $upstream_addr $upstream_status';
 
    #######
    ## http setting
    #######
    sendfile       on;
    tcp_nopush     on;
    tcp_nodelay    on;
    keepalive_timeout  65;
    proxy_cache_path /var/www/cache levels=1:2 keys_zone=mycache:20m max_size=2048m inactive=60m;
    proxy_temp_path /var/www/cache/tmp;
 
    fastcgi_connect_timeout 3000;
    fastcgi_send_timeout 3000;
    fastcgi_read_timeout 3000;
    fastcgi_buffer_size 256k;
    fastcgi_buffers 8 256k;
    fastcgi_busy_buffers_size 256k;
    fastcgi_temp_file_write_size 256k;
    fastcgi_intercept_errors on;
 
    #
    client_header_timeout 600s;
    client_body_timeout 600s;
   # client_max_body_size 50m;
    client_max_body_size 100m;
    client_body_buffer_size 256k;
 
    gzip  on;
    gzip_min_length  1k;
    gzip_buffers     4 16k;
    gzip_http_version 1.1;
    gzip_comp_level 9;
    gzip_types       text/plain application/x-javascript text/css application/xml text/javascript application/x-httpd-php;
    gzip_vary on;
 
    ## includes vhosts
    include vhosts/*.conf;
}



[root@external-lb01 ~]# cd /data/nginx/conf/vhosts/
[root@external-lb01 vhosts]# ls
-rw-r-xr-- 1 root root  889 12月 26 15:18 bpm.kevin.com.conf
-rw-r-xr-- 1 root root  724 12月 26 14:38 mobi.kevin.com.conf


[root@external-lb01 vhosts]# cat bpm.kevin.com.conf 
upstream os-8080 {
      ip_hash;
      server 10.0.58.20:8080 max_fails=3 fail_timeout=15s;
      server 10.0.58.21:8080 max_fails=3 fail_timeout=15s;
}
          
  server {
      listen      80;
      server_name bpm.kevin.com;
    
      access_log  /data/nginx/logs/bpm.kevin.com-access.log main;
      error_log  /data/nginx/logs/bpm.kevin.com-error.log;
    
 location / {
         proxy_pass http://os-8080;
         proxy_set_header Host $host;
         proxy_redirect  http://os-8080/ http://bpm.kevin.com/;
         proxy_set_header X-Real-IP $remote_addr;
         proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
         proxy_next_upstream error timeout invalid_header http_502 http_503 http_504;
        } 
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        } 
}

[root@external-lb01 vhosts]# cat mobi.kevin.com.conf 
upstream mobi_cluster{
    server 10.0.54.20:8080;
    }

server {
        listen       80;
        server_name  mobi.kevin.com;

      access_log  /data/nginx/logs/mobi.kevin.com-access.log main;
      error_log  /data/nginx/logs/mobi.kevin.com-error.log;

    location / {
            proxy_pass http://mobi_cluster;
            proxy_set_header Host $host;
            proxy_redirect  http://mobi_cluster/ http://mobi.kevin.com/;
            proxy_set_header X-Real-IP $remote_addr;
            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        } 
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        } 
}



关闭防火墙，否则要依次打开如上配置中的端口！
[root@external-lb01 vhosts]# /data/nginx/sbin/nginx -s reload

重启nginx后，发现http端口80、8080、8000、8443都起来了（lsof命令可以查看到），而tcp/udp端口5100没有起来，这是正常的。

==========顺便总结下Nginx的四大模块——proxy、headers、upstream、stream模块=========

一、ngx_http_proxy_module模块

1）proxy_pass URL;
Context: location, if in location, limit_except

注意：proxy_pass后面的路径不带uri时，其会将location的uri传递给后端主机
server {
    …
    server_name HOSTNAME;

    location /uri/ {
       proxy http://hos[:port];
       }

       …
       }

http://HOSTNAME/uri –> http://host/uri

proxy_pass后面的路径是一个uri时，其会将location的uri替换为proxy_pass的uri

server {
    …
    server_name HOSTNAME;

    location /uri/ {
        proxy http://host/new_uri/;
        }
        …
        }

http://HOSTNAME/uri/ –> http://host/new_uri/

如果location定义其uri时使用了正则表达式的模式，则proxy_pass之后必须不能使用uri; 用户请求时传递的uri将直接附加代理到的服务的之后
server {
    …
    server_name HOSTNAME;
        location ~|~* /uri/ {
        proxy http://host;
        }
        …
        }

http://HOSTNAME/uri/ –> http://host/uri/


2）proxy_set_header field value;
设定发往后端主机的请求报文的请求首部的值；Context: http, server, location

proxy_set_header X-Real-IP  $remote_addr;
$remote_addr：记录的是上一台主机的IP，而上一台主机有可能也是代理服务器

proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    $proxy_add_x_forwarded_for：记录的是源IP地址

在http客户端还有修改/etc/httpd/conf/httpd.conf文件
LogFormat "%{X-Real-IP}i %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
通过上述方法则可以在后端主机上记录真实的httpd资源请求者，而不再是只记录前端代理服务器的IP地址


3）proxy_cache_path
定义可用于proxy功能的缓存；Context:    http

proxy_cache_path path [levels=levels] [use_temp_path=on|off] keys_zone=name:size [inactive=time] 
[max_size=size] [manager_files=number] [manager_sleep=time] [manager_threshold=time] [loader_files=number] 
[loader_sleep=time] [loader_threshold=time] [purger=on|off] [purger_files=number] [purger_sleep=time] [purger_threshold=time];

proxy_cache_path /var/cache/nginx/proxy_cache levels=1:2:1 keys_zone=gmtest:20M max_size=1G;

4）proxy_cache zone | off;
指明要调用的缓存，或关闭缓存机制；Context: http, server, location
proxy_cache gmtest;

5）proxy_cache_key string;
缓存中用于“键”的内容；
默认值：proxy_cache_key $scheme$proxy_host$request_uri;

建议定义成方法和url

6）proxy_cache_valid [code …] time;
定义对特定响应码的响应内容的缓存时长；

定义在http{…}中；
proxy_cache_path /var/cache/nginx/proxy_cache levels=1:1:1 keys_zone=gmtest:20m max_size=1g;

定义在需要调用缓存功能的配置段，例如server{…}，或者location中；
proxy_cache gmtest;
proxy_cache_key $request_uri;
proxy_cache_valid 200 302 301 1h;
proxy_cache_valid any 1m;


7）proxy_cache_use_stale
proxy_cache_use_stale error | timeout | invalid_header | updating | http_500 | http_502 | http_503 | http_504 | http_403 
| http_404 | off …;

Determines in which cases a stale cached response can be used when an error occurs during communication with the proxied server.

后端服务器的故障在那种情况下，就使用缓存的功能对客户的进行返回


8）proxy_cache_methods GET | HEAD | POST …;
If the client request method is listed in this directive then the response will be cached. “GET” and “HEAD” methods are always 
added to the list, though it is recommended to specify them explicitly.

默认方法就是GET HEAD方法


9）proxy_hide_header field;
By default, nginx does not pass the header fields “Date”, “Server”, “X-Pad”, and “X-Accel-…” from the response of a proxied server 
to a client. The proxy_hide_header directive sets additional fields that will not be passed.

10）proxy_connect_timeout time;
Defines a timeout for establishing a connection with a proxied server. It should be noted that this timeout cannot usually exceed 75 
seconds.

默认为60s


11）buffer相关的配置
a：proxy_buffer_size size;
Sets the size of the buffer used for reading the first part of the response received from the proxied server. This part usually contains 
a small response header. By default, the buffer size is equal to one memory page.

默认为4k|8k
b：proxy_buffering on | off;
Enables or disables buffering of responses from the proxied server.

默认为on
c：proxy_buffers number size;
Sets the number and size of the buffers used for reading a response from the proxied server, for a single connection. By default, the buffer size is equal to one memory page.

默认为8 4k|8k
d：proxy_busy_buffers_size size;
When buffering of responses from the proxied server is enabled, limits the total size of buffers that can be busy sending a response to the client while the response is not yet fully read.

默认为8k|16k

二、ngx_http_headers_module模块

The ngx_http_headers_module module allows adding the “Expires” and “Cache-Control” header fields, and arbitrary fields, 
to a response header.

向由代理服务器响应给客户端的响应报文添加自定义首部，或修改指定首部的值；

1）add_header name value [always];
添加自定义首部；

add_header X-Via  $server_addr;
经由的代理服务器地址

add_header X-Accel $server_name;

2）expires [modified] time;
expires epoch | max | off;

用于定义Expire或Cache-Control首部的值；
可以把服务器定义的缓存时长修改了；

三、ngx_http_upstream_module模块

The ngx_http_upstream_module module is used to define groups of servers that can be referenced by the proxy_pass, fastcgi_pass, 
uwsgi_pass, scgi_pass, and memcached_pass directives.

1）upstream name { … }
定义后端服务器组，会引入一个新的上下文；Context: http

upstream httpdsrvs {
            server …
            server…
            …
}


2）server address [parameters];
在upstream上下文中server成员，以及相关的参数；Context: upstream

address的表示格式：
unix:/PATH/TO/SOME_SOCK_FILE
IP[:PORT]
HOSTNAME[:PORT]

parameters：
weight=number
权重，默认为1；默认算法是wrr

max_fails=number
失败尝试最大次数；超出此处指定的次数时，server将被标记为不可用

fail_timeout=time
设置将服务器标记为不可用状态的超时时长

max_conns
当前的服务器的最大并发连接数

backup
将服务器标记为“备用”，即所有服务器均不可用时此服务器才启用

down
标记为“不可用”

先在nginx前端配置down，然后在下架后端服务器，上架新的web程序，然后上架，在修改配置文件立马的down


3）least_conn;
最少连接调度算法，当server拥有不同的权重时其为wlc
要在后端服务器是长连接时，效果才好，比如mysql


4）ip_hash;
源地址hash调度方法


5）hash key [consistent];
基于指定的key的hash表来实现对请求的调度，此处的key可以直接文本、变量或二者的组合

作用：将请求分类，同一类请求将发往同一个upstream server

If the consistent parameter is specified the ketama consistent hashing method will be used instead.

示例：
hash $request_uri consistent;
hash $remote_addr;
hash $cookie_name; 对同一浏览器的请求，发往同一个upstream server


6）keepalive connections;
为每个worker进程保留的空闲的长连接数量

nginx的其它的二次发行版：
tengine
OpenResty

1.9版本之后可以反代tcp／udp的协议，基于stream模块，工作与传输层

四、ngx_stream_core_module模块

模拟反代基于tcp或udp的服务连接，即工作于传输层的反代或调度器

1）stream { … }
定义stream相关的服务；Context: main

stream {
upstream sshsrvs {
  server 192.168.22.2:22;
  server 192.168.22.3:22;
  least_conn;
}

server {
   listen 10.1.0.6:22022;
   proxy_pass sshsrvs;
}
}

stream模块中管的upstream模块的用法同上


2）listen
listen address:port [ssl] [udp] [proxy_protocol] [backlog=number] [bind] [ipv6only=on|off] [reuseport] 
[so_keepalive=on|off|[keepidle]:[keepintvl]:[keepcnt]];