Golang 语言--linux 下 go语言 vim设置
时间:2022-05-05
本文章向大家介绍Golang 语言--linux 下 go语言 vim设置,主要内容包括其使用实例、应用技巧、基本知识点总结和需要注意事项,具有一定的参考价值,需要的朋友可以参考一下。
- 在linux下安装 vundle.vim,请参照https://github.com/VundleVim/Vundle.vim获取和配置
- 打开.vimrc,如果没有可以创建.vimrc,复制如下内容到.vimrc
" An example for a vimrc file.
"" Maintainer: Bram Moolenaar <Bram@vim.org>
" Last change: 2014 Nov 05"
" To use it, copy it to" for Unix and OS/2: ~/.vimrc
" for Amiga: s:.vimrc" for MS-DOS and Win32: $VIM_vimrc
" for OpenVMS: sys$login:.vimrcset nocompatible " be iMproved, required
filetype off " required" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
" let Vundle manage Vundle, required
Plugin 'gmarik/Vundle.vim'" All of your Plugins must be added before the following line
Plugin 'fatih/vim-go'
call vundle#end() " required
filetype plugin indent on " required
" When started as "evim", evim.vim will already have done these settings.if v:progname =~? "evim"
finish
endif" Use Vim settings, rather than Vi settings (much better!).
" This must be first, because it changes other options as a side effect.set nocompatible" allow backspacing over everything in insert mode
set backspace=indent,eol,start
if has("vms")
set nobackup " do not keep a backup file, use versions insteadelse
set backup " keep a backup file (restore to previous version)
set undofile " keep an undo file (undo changes after closing)
endifset history=50 " keep 50 lines of command line history
set ruler " show the cursor position all the timeset showcmd " display incomplete commands
set incsearch " do incremental searching" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries
" let &guioptions = substitute(&guioptions, "t", "", "g")" Don't use Ex mode, use Q for formatting
map Q gq
" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo," so that you can undo CTRL-U after inserting a line break.
inoremap <C-U> <C-G>u<C-U>
" In many terminal emulators the mouse works just fine, thus enable it.if has('mouse') set mouse=a
endif" Switch syntax highlighting on, when the terminal has colors
" Also switch on highlighting the last used search pattern.if &t_Co > 2 || has("gui_running")
syntax on
set hlsearch
endif" Only do this part when compiled with support for autocommands.
if has("autocmd")
" Enable file type detection. " Use the default filetype settings, so that mail gets 'tw' set to 72,
" 'cindent' is on in C files, etc. " Also load indent files, to automatically do language-dependent indenting.
filetype plugin indent on
" Put these in an autocmd group, so that we can delete them easily.
augroup vimrcEx
au! " For all text files set 'textwidth' to 78 characters.
autocmd FileType text setlocal textwidth=78
" When editing a file, always jump to the last known cursor position. " Don't do it when the position is invalid or when inside an event handler
" (happens when dropping a file on gvim). " Also don't do it when the mark is in the first line, that is the default
" position when opening a file.
autocmd BufReadPost *
if line("'"") > 1 && line("'"") <= line("$") |
exe "normal! g`"" |
endif
augroup ENDelse
set autoindent " always set autoindenting on
endif " has("autocmd")" Convenient command to see the difference between the current buffer and the
" file it was loaded from, thus the changes you made." Only define it when not defined already.
if !exists(":DiffOrig")
command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis
| wincmd p | diffthis
endif
if has('langmap') && exists('+langnoremap')
" Prevent that the langmap option applies to characters that result from a " mapping. If unset (default), this may break plugins (but it's backward
" compatible). set langnoremap
endifset nuset tabstop=4set softtabstop=4set shiftwidth=4set nobackup" 这里是ctags
set tags=/home/.../go/go/tags
set tags+=/home/.../go/dev/danmu/tags
- 使用vim打开.vimrc,使用命令:PluginInstall,就可以下载相应的plugin包了
这里就可以使用vim 编辑.go 文件了
如果还需要,可以使用最新的ctags,一定要最新的,否则不支持.go 的tags
- JavaScript 教程
- JavaScript 编辑工具
- JavaScript 与HTML
- JavaScript 与Java
- JavaScript 数据结构
- JavaScript 基本数据类型
- JavaScript 特殊数据类型
- JavaScript 运算符
- JavaScript typeof 运算符
- JavaScript 表达式
- JavaScript 类型转换
- JavaScript 基本语法
- JavaScript 注释
- Javascript 基本处理流程
- Javascript 选择结构
- Javascript if 语句
- Javascript if 语句的嵌套
- Javascript switch 语句
- Javascript 循环结构
- Javascript 循环结构实例
- Javascript 跳转语句
- Javascript 控制语句总结
- Javascript 函数介绍
- Javascript 函数的定义
- Javascript 函数调用
- Javascript 几种特殊的函数
- JavaScript 内置函数简介
- Javascript eval() 函数
- Javascript isFinite() 函数
- Javascript isNaN() 函数
- parseInt() 与 parseFloat()
- escape() 与 unescape()
- Javascript 字符串介绍
- Javascript length属性
- javascript 字符串函数
- Javascript 日期对象简介
- Javascript 日期对象用途
- Date 对象属性和方法
- Javascript 数组是什么
- Javascript 创建数组
- Javascript 数组赋值与取值
- Javascript 数组属性和方法
- python提示警告InsecureRequestWarning
- Day11.类和对象这回事儿
- Day12.魔法方法&方法重写
- Linux基础第一课——基础知识了解
- 【Vue CLI】手把手教你撸插件
- Linux基础第二课——系统架构
- Day13.继承&多态
- Linux第三课——目录操作
- Linux基础第四课——文件操作
- Linux基础第五课——用户管理
- Linux基础第六课——grep|awk|sort|uniq
- Python向上取整,向下取整以及四舍五入函数
- 使用requests模块post payload请求
- 解决HTTP status code is not handled or not allowed
- Day8.函数那些事儿