poj-----(2528)Mayor's posters(线段树区间更新及区间统计+离散化)
Mayor's posters
Time Limit: 1000MS |
Memory Limit: 65536K |
|
---|---|---|
Total Submissions: 43507 |
Accepted: 12693 |
Description
The citizens of Bytetown, AB, could not stand that the candidates in the mayoral election campaign have been placing their electoral posters at all places at their whim. The city council has finally decided to build an electoral wall for placing the posters and introduce the following rules:
- Every candidate can place exactly one poster on the wall.
- All posters are of the same height equal to the height of the wall; the width of a poster can be any integer number of bytes (byte is the unit of length in Bytetown).
- The wall is divided into segments and the width of each segment is one byte.
- Each poster must completely cover a contiguous number of wall segments.
They have built a wall 10000000 bytes long (such that there is enough place for all candidates). When the electoral campaign was restarted, the candidates were placing their posters on the wall and their posters differed widely in width. Moreover, the candidates started placing their posters on wall segments already occupied by other posters. Everyone in Bytetown was curious whose posters will be visible (entirely or in part) on the last day before elections. Your task is to find the number of visible posters when all the posters are placed given the information about posters' size, their place and order of placement on the electoral wall.
Input
The first line of input contains a number c giving the number of cases that follow. The first line of data for a single case contains number 1 <= n <= 10000. The subsequent n lines describe the posters in the order in which they were placed. The i-th line among the n lines contains two integer numbers li and ri which are the number of the wall segment occupied by the left end and the right end of the i-th poster, respectively. We know that for each 1 <= i <= n, 1 <= li <= ri <= 10000000. After the i-th poster is placed, it entirely covers all wall segments numbered li, li+1 ,... , ri.
Output
For each input data set print the number of visible posters after all the posters are placed. The picture below illustrates the case of the sample input.
Sample Input
1
5
1 4
2 6
8 10
3 4
7 10
Sample Output
4
Source
关于区间离散的一些知识:
通俗点说,离散化就是压缩区间,使原有的长区间映射到新的短区间,但是区间压缩前后的覆盖关系不变。举个例子:
有一条1到10的数轴(长度为9),给定4个区间[2,4] [3,6] [8,10] [6,9],覆盖关系就是后者覆盖前者,每个区间染色依次为 1 2 3 4。
现在我们抽取这4个区间的8个端点,2 4 3 6 8 10 6 9
然后删除相同的端点,这里相同的端点为6,则剩下2 4 3 6 8 10 9
对其升序排序,得2 3 4 6 8 9 10
然后建立映射
2 3 4 6 8 9 10
↓ ↓ ↓ ↓ ↓ ↓ ↓
1 2 3 4 5 6 7
那么新的4个区间为 [1,3] [2,4] [5,7] [4,6],覆盖关系没有被改变。新数轴为1到7,即原数轴的长度从9压缩到6,显然构造[1,7]的线段树比构造[1,10]的线段树更省空间,搜索也更快,但是求解的结果却是一致的。
离散化时有一点必须要注意的,就是必须先剔除相同端点后再排序,这样可以减少参与排序元素的个数,节省时间。
代码:
1 /*poj 2528 线段树+离散化*/
2 //#define LOCAL
3 #include<stdio.h>
4 #include<string.h>
5 #include<stdlib.h>
6 #include<iostream>
7 #include<algorithm>
8
9 #define MAXN 10000010
10 #define maxn 10005
11 using namespace std;
12
13 struct node
14 {
15 int st;
16 int en;
17 }ss[maxn];
18
19 int lis[maxn<<1]; //离散化素组
20 int hash[MAXN]; //运用哈希表
21 int ans;
22 int vis[maxn];
23
24 struct post
25 {
26 int lef,rig;
27 int mid(){
28 return lef+((rig-lef)>>1);
29 }
30 int id; //颜色种类
31 int type; //用于延迟
32 }poster[maxn<<3];
33
34 void build_seg(int left,int right,int pos)
35 {
36 poster[pos].lef=left;
37 poster[pos].rig=right;
38 poster[pos].id=0;
39 poster[pos].type=0;
40 if(left==right) return ;
41 int mid=poster[pos].mid();
42 build_seg(left,mid,pos<<1);
43 build_seg(mid+1,right,pos<<1|1);
44 }
45
46 void Update(int left,int right,int pos,int id)
47 {
48 if(poster[pos].lef>=left&&poster[pos].rig<=right)
49 {
50 poster[pos].id=id;
51 poster[pos].type=id;
52 return ;
53 }
54 if(poster[pos].type&&poster[pos].lef!=poster[pos].rig)
55 {
56 //向下更新一次
57 poster[pos<<1].type=poster[pos<<1|1].type=poster[pos].type;
58 poster[pos<<1].id=poster[pos<<1|1].id=poster[pos].id;
59 poster[pos].type=0;
60 }
61 int mid=poster[pos].mid();
62 if(mid>=left)
63 Update(left,right,pos<<1,id);
64 if(mid<right)
65 Update(left,right,pos<<1|1,id);
66 if(poster[pos].lef!=poster[pos].rig)
67 {
68 if(poster[pos<<1].id==poster[pos<<1|1].id)
69 poster[pos].id=poster[pos<<1].id;
70 else
71 poster[pos].id=0; //说明有多种可能,需要再向下查询统计
72 }
73 }
74
75 void query(int left,int right,int pos) //进行统计
76 {
77 if(poster[pos].lef<left||poster[pos].rig>right)
78 return ;
79 if(poster[pos].id)
80 {
81 if(!vis[poster[pos].id])
82 {
83 ans++;
84 vis[poster[pos].id]=true;
85 }
86 return;
87 }
88 if(poster[pos].lef!=poster[pos].rig){
89 query(left,right,pos<<1);
90 query(left,right,pos<<1|1);
91 }
92 }
93
94 int main()
95 {
96 #ifdef LOCAL
97 freopen("test.in","r",stdin);
98 #endif
99 int cas,n;
100 scanf("%d",&cas);
101 while(cas--)
102 {
103 scanf("%d",&n);
104 int k=0;
105 memset(hash,0,sizeof(hash));
106 memset(vis,0,sizeof(vis)); //初始化为0表示都没有访问过
107 for(int i=0;i<n;i++)
108 {
109 scanf("%d %d",&ss[i].st,&ss[i].en);
110 lis[k++]=ss[i].st;
111 lis[k++]=ss[i].en;
112 }
113 sort(lis,lis+k); //升序
114 int j=0;
115 for(int i=0;i<k;i++)
116 {
117 if(hash[lis[i]]==0)
118 hash[lis[i]]=++j; //编号从1起
119 }
120 build_seg(1,j,1);
121 for(int i=0;i<n;i++){
122 Update(hash[ss[i].st],hash[ss[i].en],1,i+1);
123 }
124 ans=0;
125 query(1,j,1);
126 printf("%dn",ans);
127 }
128 return 0;
129 }
- redis事务
- 数据库表反向生成(一) MyBatis-generator与IDEA的集成
- 数据库表反向生成(二) Django ORM inspectdb
- RabbitMQ与AMQP协议
- 大数据算法设计模式(2) - 左外链接(leftOuterJoin) spark实现
- hs_err_pid
- django celery的分布式异步之路(二) 高并发
- django celery的分布式异步之路(一) 起步
- SpringMVC拦截器Interceptor
- 元宵快乐:看SQL大师们用SQL绘制的团圆
- Python Redis pipeline操作
- python concurrent.futures
- Deepmind的星际争霸2强化学习教程(1):建立环境与训练模型
- python contextlib 上下文管理器
- JavaScript 教程
- JavaScript 编辑工具
- JavaScript 与HTML
- JavaScript 与Java
- JavaScript 数据结构
- JavaScript 基本数据类型
- JavaScript 特殊数据类型
- JavaScript 运算符
- JavaScript typeof 运算符
- JavaScript 表达式
- JavaScript 类型转换
- JavaScript 基本语法
- JavaScript 注释
- Javascript 基本处理流程
- Javascript 选择结构
- Javascript if 语句
- Javascript if 语句的嵌套
- Javascript switch 语句
- Javascript 循环结构
- Javascript 循环结构实例
- Javascript 跳转语句
- Javascript 控制语句总结
- Javascript 函数介绍
- Javascript 函数的定义
- Javascript 函数调用
- Javascript 几种特殊的函数
- JavaScript 内置函数简介
- Javascript eval() 函数
- Javascript isFinite() 函数
- Javascript isNaN() 函数
- parseInt() 与 parseFloat()
- escape() 与 unescape()
- Javascript 字符串介绍
- Javascript length属性
- javascript 字符串函数
- Javascript 日期对象简介
- Javascript 日期对象用途
- Date 对象属性和方法
- Javascript 数组是什么
- Javascript 创建数组
- Javascript 数组赋值与取值
- Javascript 数组属性和方法
- Hacking with iOS: SwiftUI Edition - 愿望清单项目(三)
- 浏览器在线预览offce,vue-pdf预览pdf文件
- vivo商城前端架构升级-总览篇
- 《JSON笔记之三》---postman中传入json串
- Spring源码学习笔记(13)——JDBC
- java系列之注解
- NodeJs初入Http模块和Url模块
- Spring系列之实例化、初始化处理器
- NodeJs安装supervisor实现重载
- MyBatis系列之浅谈SQL执行流程分析
- NodeJs引入自定义模块
- NodeJs引入操作第三方插件
- RocketMQ 环境搭建
- ThreadLocal源码分析
- ThreadPoolExecutor详解