ABB AC 900F学习笔记122:Freelance_Engineering_Process_Stations-28

时间:2021-09-05
本文章向大家介绍ABB AC 900F学习笔记122:Freelance_Engineering_Process_Stations-28,主要包括ABB AC 900F学习笔记122:Freelance_Engineering_Process_Stations-28使用实例、应用技巧、基本知识点总结和需要注意事项,具有一定的参考价值,需要的朋友可以参考一下。

继续学习

A.3 Object data: AC 800F and AC 800FR
跳过这一节
A.4 Object data: AC 700F
跳过这一节
A.5 Object data: PROFIBUS modules
对象数据:PROFIBUS 模板
A.5.1 Parameters - CM 772F/CI 773F PROFIBUS module
参数 - CM 772F/CI 773F PROFIBUS 模板
Name
命名
Data type 
数据类型
Conf.
配置
Acc.
访问
Comment
注释
SlotID
槽号
INT16
16位整数
yes
用户可以配置
RO
只读
Slot of module 0..3
模板槽号0……3
BoardType
板类型
WORD

NO

用户不可配置

(系统决定)

RO
只读
Internal hardware designation
内部硬件设计
A.5.2 Parameters - CI 930F PROFIBUS module 
参数 - CI 930F PROFIBUS 模板
Name
命名
Data type 
数据类型
Conf.
配置
Acc.
访问
Comment
注释
SlotID
槽号
INT16
16位整数
yes
用户可以配置
RO
只读
Slot of module 0..3
模板槽号0……3
BoardType
板类型
WORD

NO

用户不可配置

(系统决定)

RO
只读
Internal hardware designation
内部硬件设计
IsRed
是否冗余

BOOL

布尔

NO

用户不可配置

(系统决定)

RO
只读
TRUE: active redundancy mode
真:激活冗余模式
A.5.3 Diagnostic data - PROFIBUS modules
诊断数据 - PROFIBUS 模板
The PROFIBUS modules CM 772F/CI 773F and PM 930F (redundant and nonredundant) provide the same diagnostic data; only the STA bit encoding is different for redundant and non-redundant use. 
PROFIBUS模板CM 772F/CI 773F和PM 930F (冗余和非冗余)提供同样的诊断数据;只有STA编码在冗余和非冗余使用下不同。
Name
命名
Data
type
数据类型
Comment
注解
ERR
错误

BOOL

布尔

TRUE: Error on module
真:模板错误
STA
状态
UDINT
无符号双整型
Bit-encoded error
位编码错误
STA error codes - CM 772F//CI 773F and CI 930F (non-redundant)
STA 错误代码 -CM 772F/CI 773F和CI 930F(非冗余)
Bit # in
STA
状态位
Decimal error
code
十进制错误代码
Hexadecimal
error code
十六进制错误代码
Error
错误

cause

原因

0 1 0x0001
Wrong module
错误的模板
Wrong module type plugged
(for example, CI 930F configured, but CM 772F plugged)
插入错误的模板类型
(比如,配置CI 930F,但插入了CM 772F模板)
1 2 0x0002
Empty slot
空插槽
Empty slot (for example, CI 930F configured, but no module plugged)
空插槽(比如,配置了CI 930F,结果没有插模板)
2 4 0x0004
Identification
error
标识错误
No identification of module possible
可能没有识别出模板
3 8 0x0008
Self-test error
自检错误
Module error (self-test error) issued (for example, by the PROFIBUS master). Error code is communicated with alarm message.
模板错误(自检错误)发出(比如,作为PROFIBUS主站)。错误代码与警告信息通信。
4 16
0x0010
old self-test
error
旧自检错误
Old hardware self-test errors
硬件自检旧错误
Example:
例如:
STA = 24 (decimal) => 0x0018 => old hardware errors in module and self-test error in module.
STA值为24(十进制),十六进制18,模板硬件旧错误和模板自检错误。
STA error code - CI 930F (redundant)
STA错误 -CI 930(冗余)
In the redundant mode the states of both controllers are combined into STA diagnosis data:
在冗余模式下,将两个控制器的状态合并为STA诊断数据。
  • The status of controller IP1 is set to “Low nibble” of STA diagnosis data
  • 控制器IP1的状态设置为STA诊断数据的低8位。
  • The status of controller IP2 is set to “High nibble” of STA diagnosis data.
  • 控制器IP2的状态设置为STA诊断数据的高8位。
Bit # in
STA
状态位
Decimal error
code
十进制错误代码
Hexadecimal
error code
十六进制错误代码
Error
错误
Cause
原因
0 1 0x0001
Wrong module in controller IP1
控制器IP1错误的模板
Wrong module type plugged (for example, CI 930F configured, but CM 772F plugged) in controller IP1
控制器IP1插入错误的模板
(比如,配置的CI 930F,但插入了CM 772F模板)
1 2 0x0002
Empty slot in controller IP1
控制器IP1空插槽
Empty slot (for example, CI 930F configured, but no module plugged) in controller IP1
控制器IP1空插槽(比如,配置了CI 930F,但没有插模板)
2 4 0x0004
Identification error in controller IP1
控制器IP1没有识别出模板
No identification of module possible in controller IP1 
控制器IP1可能没识别出模板
3 8
0x0008
Self-test error in module of controller IP1
控制器IP1模板自检错误
Self-test error, module error issued (for example, by the
PROFIBUS master) in controller IP1. Error code is communicated with alarm message.
控制器IP1模板错误(自检错误)发出(比如,作为PROFIBUS主站)。错误代码与警告信息通信。
4 16
0x0010
Old self-test error in module of controller IP1
控制器IP1模块自检旧错误
Old hardware self-test errors in controller IP1
控制器IP1模板自检旧错误
8 256
0x0100
Wrong module in controller IP2
控制器IP2错误的模板
Wrong module type plugged (for example, CI 930F configured, but CM 772F plugged) in controller IP2
控制器IP2插入错误的模板
(比如,配置的CI 930F,但插入了CM 772F模板)
9 512
0x0200
Empty slot in controller IP2
控制器IP2空插槽
Empty slot (for example, CI 930F configured, but no module plugged) in controller IP2
控制器IP2空插槽(比如,配置了CI 930F,但没有插模板)
10 1024
0x0400
Identification error in controller IP2
控制器IP2没有识别出模板
No identification of module possible in controller IP2 
控制器IP2可能没识别出模板
11 2048
0x0800
Self-test error in module of controller IP2
控制器IP2模板自检错误
Self-test error, module error issued (for example, by the PROFIBUS master) in controller IP2. Error code is communicated with alarm message.
控制器IP2模板错误(自检错误)发出(比如,作为PROFIBUS主站)。错误代码与警告信息通信。
12 4096
0x1000
Old self-test error in module of controller IP2
控制器IP2模块自检旧错误
Old hardware self-test errors in controller IP2
控制器IP2模板自检旧错误
Example:
例如:
STA = 4098 (decimal) => 0x1002 => old hardware errors in module IP2 and empty slot in module IP1.
STA数值4098(十进制),0x1002十六进制,表示控制器IP2硬件错误和控制器IP1空插槽错误。
至此,这个文档看完了,下一个文档学习freelance 工程师站

原文地址:https://www.cnblogs.com/fishingsriver/p/15231357.html