H3C AC+AP配置文件

AP设置

1.将AP 调整为fit ap。、

AC设置

1.划分用户vlan管理vlan，给vlan增加虚拟地址

vlan batch 3 200 1000

interface Vlan-interface3
ip address 10.0.3.1 255.255.255.0
interface Vlan-interface200
ip address 10.0.200.1 255.255.252.0
interface Vlan-interface1000
ip address 10.0.2.200 255.255.255.0

2.开启DHCP服务，增加地址池 。

dhcp en

dhcp server ip-pool vlan3
network 10.0.3.0 mask 255.255.255.0
option 43 ip-address 10.0.3.1

dhcp server ip-pool vlan200
gateway-list 10.0.200.1
network 10.0.200.0 mask 255.255.252.0
dns-list 223.5.5.5 114.114.114.114
expired day 0 hour 3   //租期时间3小时

3.设置无线组，可以增加多个。

wlan service-template 1
ssid GALLERIA
vlan 200
akm mode psk
preshared-key pass-phrase cipher 88888888
cipher-suite ccmp
security-ie rsn
security-ie wpa
service-template enable

4.接口设置

interface GigabitEthernet1/0/5
port link-mode bridge
port link-type trunk
port trunk permit vlan 3 200 1000

5.默认路由为下一跳地址

ip route-static 0.0.0.0 0 10.0.2.1

6.将AC改为自动获取ap,并需要认证固化。

wlan auto-ap enable
wlan auto-persistent enable
wlan ap-authentication enable

7.开启默认组ap,开启天线辐射

wlan ap-group default-group
provision auto-update enable
vlan 1
ap-model WAP722E
radio 1
radio enable
service-template 1
radio 2
radio enable
service-template 1

8.上线ap,绑定service-template

wlan ap 60da-8391-9520 model WAP722E
serial-id 219801A0Q29177G000BD
vlan 1
radio 1
service-template 1
radio 2
service-template 1