k8s报错解决思路

问题1

1.报错信息如下

[root@ken1 ~]# kubectl get po
The connection to the server 192.168.64.11:6443 was refused - did you specify the right host or port?

解决思路：

1.首先检查kubelet以及dockers是否启动

2.检查交换分区是否关闭

本机是因为交换分区没有关闭造成的，在/etc/fstab文件中禁用重启系统即可

[root@ken1 ~]# free -h
              total        used        free      shared  buff/cache   available
Mem:           1.8G        188M        1.0G        8.6M        593M        1.4G
Swap:          2.0G          0B        2.0G
[root@ken1 ~]# vim /etc/fstab 
[root@ken1 ~]# cat /etc/fstab 

#
# /etc/fstab
# Created by anaconda on Wed Aug 14 15:30:02 2019
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/cl-root     /                       xfs     defaults        0 0
UUID=5ab6cfa4-d753-4d73-b3d6-ebf408b58b56 /boot                   xfs     defaults        0 0
#/dev/mapper/cl-swap     swap                    swap    defaults        0 0

再次查看，问题解决

[root@ken1 ~]# kubectl get no
NAME   STATUS   ROLES    AGE     VERSION
ken1   Ready    master   3d15h   v1.15.2
ken2   Ready    <none>   3d15h   v1.15.2
ken3   Ready    <none>   3d15h   v1.15.2

==============================================================================

问题2

节点加入集群中报如下的错误

[root@ken2 ~]# kubeadm join 192.168.232.199:6443 --token 5fsbj7.3iobmze5ow8jcz4w     --discovery-token-ca-cert-hash sha256:c17bcdcf9b65fef975527d3b02d9cc22621b77916a974a35b112fc5639cb4e77
[preflight] Running pre-flight checks
        [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
        [WARNING SystemVerification]: this Docker version is not on the list of validated versions: 19.03.1. Latest validated version: 18.09
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.15" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
[kubelet-check] Initial timeout of 40s passed.
error execution phase kubelet-start: error uploading crisocket: timed out waiting for the condition

解决办法

在从节点执行如下的命令

[root@ken2 ~]# kubeadm reset

[reset] WARNING: Changes made to this host by 'kubeadm init' or 'kubeadm join' will be reverted.
[reset] Are you sure you want to proceed? [y/N]: y
[preflight] Running pre-flight checks
W0820 16:03:33.400935   56927 removeetcdmember.go:79] [reset] No kubeadm config, using etcd pod spec to get data directory
[reset] No etcd config found. Assuming external etcd
[reset] Please, manually reset etcd to prevent further issues
[reset] Stopping the kubelet service
[reset] Unmounting mounted directories in "/var/lib/kubelet"
[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki]
[reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf]
[reset] Deleting contents of stateful directories: [/var/lib/kubelet /etc/cni/net.d /var/lib/dockershim /var/run/kubernetes]
The reset process does not reset or clean up iptables rules or IPVS tables.
If you wish to reset iptables, you must do so manually.
For example:
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X

If your cluster was setup to utilize IPVS, run ipvsadm --clear (or similar)
to reset your system's IPVS tables.

The reset process does not clean your kubeconfig files and you must remove them manually.
Please, check the contents of the $HOME/.kube/config file.

然后根据提示执行下面的命令

[root@ken2 ~]# iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X

再次加入即可成功

======================================================================

Continue Reading

原文地址：https://www.cnblogs.com/it-peng/p/11393812.html